Shock Tool
Shock Tool Product Flyer
Product Catalog
Downhole Shock Tool
The Park City Shock Tool effectively reduces impact loading on the bit to extend bit life and reduce bit trips. By isolating axial bit vibrations from the drill string, the Shock Tool will reduce lateral and torsional drill string vibrations, and related fatigue damage or failure of the rotary connections. The Shock Tool allows optimum bit speed to be used under rough drilling conditions, increasing the rate of penetration.
Features & Benefits
- Isolates bit induced vibrations from the drill string.
- Fully oil-sealed and lubricated for extended service life.
- Does not use temperature-sensitive elastomers for shock absorption, therefore is suitable for use in temperatures to 250°F (120°C), with optional seals available for temperatures up to 320°F (160°C).
- Reliable Belleville disc springs provide optimum load/deflection characteristics to maintain consistent contact between bit and formation, effectively reducing impact loading to extend bit life.
- Pressure balanced to eliminate the effect of downhole hydrostatic pressure.
- Low friction torsional drive permits free vertical movement.
- Well-stabilized, with internal three-point lateral support to minimize deflection.
- Reduces wear and tear on rig and equipment, and fatigue failures on drill collars and drill pipe.
- Automatically compensates for pump open force.
Operation
- For maximum effectiveness, the Shock Tool should be positioned immediately above the bit.
- With a packed bottom hole assembly, the Shock Tool may be located a minimum of two drill collar lengths above the top stabilizer, however bit protection will be reduced due to the greater un-sprung mass below the tool.
- Automatic compensation of pump open effect makes the Shock Tool effective with any combination of bit weight or circulating pressure.
Gallery
Shock Tool
Shock Tool Product Flyer
Product Catalog
Technical Specifications
Imperial
| Nominal OD (inch) | Length (ft) | Thru Bore (inch) | Tensile Yield (lbs) | Pump Open Area (inch2) | Torsional Limit (ft-lbs) | Approx. Weight (lbs) |
| 3.38 | 7.9 | 1.00 | 102 000 | 5.9 | 8 000 | 225 |
| 3.50 | 7.8 | 1.00 | 239 000 | 5.9 | 10 000 | 230 |
| 4.75 | 10.7 | 1.50 | 561 500 | 11.0 | 20 000 | 540 |
| 6.25 | 11.7 | 2.25 | 926 600 | 19.6 | 37 900 | 1000 |
| 6.50 | 11.6 | 2.25 | 960 000 | 19.6 | 39 500 | 1030 |
| 6.75 | 11.5 | 2.75 | 837 400 | 21.6 | 46 400 | 1100 |
| 8.00 | 11.9 | 2.75 | 1 378 800 | 30.6 | 104 600 | 1690 |
| 9.00 | 12.3 | 3.00 | 1 502 000 | 38.5 | 125 000 | 2220 |
| 9.50 | 12.3 | 3.00 | 1 209 000 | 41.3 | 131 000 | 2500 |
| 10.00 | 12.3 | 3.00 | 1 246 500 | 41.3 | 132 300 | 2680 |
| 11.00 | 12.0 | 3.00 | 1 628 300 | 63.6 | 225 600 | 3240 |
| 11.25 | 14.6 | 3.00 | 1 775 300 | 63.3 | 255 800 | 4120 |
| 12.00 | 12.0 | 3.00 | 1 628 300 | 63.3 | 345 400 | 3900 |
Metric
| Nominal OD (mm) | Length (m) | Thru Bore (mm) | Tensile Yield (daN) | Pump Open Area (mm2) | Torsional Limit (Nm) | Approx. Weight (kg) |
| 86 | 2.4 | 25 | 45 400 | 3 800 | 11 000 | 100 |
| 89 | 2.4 | 25 | 106 300 | 3 800 | 14 000 | 100 |
| 121 | 3.3 | 38 | 249 800 | 7 000 | 28 000 | 250 |
| 159 | 3.6 | 57 | 412 200 | 12 700 | 53 000 | 450 |
| 165 | 3.5 | 57 | 427 000 | 12 700 | 55 000 | 470 |
| 171 | 3.5 | 70 | 372 500 | 13 900 | 64 000 | 500 |
| 203 | 3.6 | 70 | 613 300 | 19 700 | 145 000 | 770 |
| 229 | 3.7 | 76 | 668 100 | 24 800 | 174 000 | 1010 |
| 241 | 3.7 | 76 | 537 800 | 26 600 | 182 000 | 1140 |
| 254 | 3.7 | 76 | 554 500 | 26 600 | 184 000 | 1220 |
| 279 | 3.7 | 76 | 724 300 | 41 000 | 313 000 | 1470 |
| 286 | 4.4 | 76 | 789 700 | 36 600 | 355 000 | 1870 |
| 305 | 3.7 | 76 | 724 300 | 41 000 | 480 000 | 1770 |
Specifications are based on as new condition and are subject to change without notice.
Sales & Rental Inquiries
Download Catalog
